Welcome to Sport Home for your fan sporting equipment.

Volleyball Style E Floor Anchor (2' ⅞ to 7') from Spalding

Volleyball Style E Floor Anchor (2' ⅞ to 7') from Spalding

Item #: 422-032
Category: Other Sports T-Z -> Volleyball
Your Price: $203.08

Click here to purchase from Online Sports

Product Features:Installed in floating wood floors resting on sleepers or metal clip fastenersFeatures removable cap and anchoring cement Measure distance from top of floor to bottom of sleeper to determine modelYou may also be interested in one of our many Spalding Volleyball Items.GENERAL DIMENSIONS: Style E floor plates are ½" threaded steel floorplates for use in installing gymnastics equipment such as uneven tensionbars, horizontal bar, and ring frame. These floor plates are designed forinstallation into floors that have a floating wood floor over concrete. Thefloor plate consists of a tube assembly, a flat circular ring that sits flush withthe wood floor surface and a removable cap. The area inside the ringallows 15/16” float before a floating floor surface interferes with the floorplate. The floor plate will withstand greater than 6000 lb. (2727 kg) verticalload with no pull out, when installed according to directions. These floor plates are compatiblewith all AAI cabled gymnastics apparatus as well as with T-base volleyball uprights. Model #422-032 can be installed in floating wood floors where the distance from the top of the floor to thebottom of the sleepers is less than 7" (178 mm).CONSTRUCTION:1. The floor plates consist of the following parts:a. 10½" (267 mm) anchor tube. Machined from 1⅝" (42 mm) round steel bar.Internal threads allow insertion of apparatus eyebolts on one end and a carriagebolt on the opposite end. Knurled outer surface engages cement and holds body inplace.b. Hex nut. ½" threads for attachment of ½" carriage bolt.c. Carriage bolt. ½" x 1½" zinc plated. SAE J429 Grade 5 bolt with 85,000-psiproof load. Provides additional surface area for engaging floor plate in cement.d. Floor plate ring that sits flush in floor surface and allows internal area for "float".This is attached to the floor with four ¼" screws.e. Removable floor plate cap. This sits inside the floor plate ring when the plate is notin use to provide a flat floor surface for other activities.2. The floor plate shall be provided completely assembled, and shall have the proper cement and installation instructions included with the floor plate package.3. The floor plate must be installed and allowed to set for a minimum of 12 hours before use with equipment.


You found Volleyball Style E Floor Anchor (2' ⅞ to 7') from Spalding in category Volleyball and subcategory Other Sports. If you need to buy more Other Sports than you are on the righ place.
Random sportign fan equipment in this category:

 
Center Standard for the ProPower System

Center Standard for the ProPower System

Retail price: $867.99
Your price: $867.99

ProPower System optional Center Standard with pads, floor plates and ground sleeves. Converts a single court system to 2 court system with 2 ratchets.
 
Volleyball Net Serving Line

Volleyball Net Serving Line

Retail price: $32.08
Your price: $32.08

Excellent training device for all levels of play. The serving line is made of durable, stretchable elastic and easily connects to the net antennae with Velcro® fasteners. This device allows the coach/player to practice serving, attacking, etc. in a specified plane above the net. Can be adjusted to almost any height. Comes in a carry bag and is an official USAV licensed product.
 
Volleyball Style E Floor Anchor (less than 2' ⅞) from Spalding

Volleyball Style E Floor Anchor (less than 2' ⅞) from Spalding

Retail price: $163.08
Your price: $163.08

Product Features:Installed in floating wood floors resting on sleepers or metal clip fastenersFeatures removable cap and anchoring cement Measure distance from top of floor to bottom of sleeper to determine modelYou may also be interested in one of our many Spalding Volleyball Items.GENERAL DIMENSIONS: Style E floor plates are ½" threaded steel floor plates for use in installing gymnastics equipment such as uneven tension bars, horizontal bar, and ring frame. These floor plates are designed for installation into floors that have a floating wood floor over concrete. The floor plate consists of a tube assembly, a flat circular ring that sits flush with the wood floor surface and a removable cap. The area inside the ring allows the top surface to "float" 15/16” in any direction around the anchor without interfering with use of the floor plate. The floor plate will withstand greater than6000 lb. vertical load with no pull out, when installed according to directions. These floor plates are compatible with all AAI cabled gymnastics apparatus as well as with T-base volleyball uprights. Model #422-014 can be installed in floating wood floors where the distance from the top of the floor to the bottom of the sleepers is less than 2⅞" (72 mm).CONSTRUCTION:1. The floor plates consist of the following parts:a. Anchor tube. Machined from ⅞" cold rolled round steel bar. Internal threads allow insertion of apparatus eyebolts on one end and a carriage bolt on the opposite end.Knurled outer surface engages cement and holds body in place.b. Hex nut. ½ threads for attachment of ½" carriage bolt.c. Carriage bolt. ½" x 1½" zinc plated. SAE J429 Grade 5 bolt with 85,000-psiproof load. Provides additional surface area for engaging floor plate in cement.d. Floor plate ring that sits flush in floor surface and allows internal area for "float". This is attached to the floor with four ¼" screws.e. Removable floor plate cap. This sits inside the floor plate ring when the plate is notin use to provide a flat floor surface for other activities.2. The floor plate shall be provided completely assembled. It shall have the proper cement and installation instructions included with the floor plate package.3. The floor plate must be installed and allowed to set for a minimum of 12 hours before use with equipment.
 
Volleyball Style BX Floor Anchor from Spalding

Volleyball Style BX Floor Anchor from Spalding

Retail price: $131.67
Your price: $131.67

Product Features:3' ¼ (81mm) knurled anchorInstalled in securely anchored wood floorsReplaceable sprint-loaded, pop-up capIncludes anchoring cementYou may also be interested in one of our many Spalding Volleyball Items.GENERAL DIMENSIONS:Style BX floor plates are ½" threaded steel floor plates for use in installing gymnastics equipment such as uneven tension bars, horizontal bar, and ring frame. These floor plates are designed for installation into floors that have multiple layers of wood over concrete. The floor plate consists of a floor plate tube assembly that has a flat circular top that sits flush with the wood floor surface. These floor plates are identical to Style B plates except the floor plate body has been extended to 3- ¼" (81 mm) in length. The floor plate will withstand greater than 6000 lb. vertical load with no pull out, when installed according to directions. These floor plates are compatible with all AAI cabled gymnastics apparatus as well as with T-base volleyball uprights.CONSTRUCTION:1. The floor plates consist of the following parts:a. Chromed removable cap. Machined from ⅞" cold rolled round steel bar. Threadedexternally to fit into the chromed floor plate body. Internal threads allow .400"engagement of ½" threaded fasteners used to attach the cabled apparatus.b. Chromed floor plate plug. .375" x 1.068" steel plug for use in protecting internal threads from dirt and other damage.c. External E-ring. Secures chromed floor plate plug inside chromed floor plate body.d. Floor plate spring. Music wire spring designed to return cap to neutral position when apparatus cables are not attached to floor plate.e. Chromed floor plate body. Machined from ⅞" cold rolled round steel bar. Internalthreads to allow insertion of chromed removable cap and anchor screw. Knurled outersurface engages cement and holds body in place. The flat floor plate top is welded to thefloor plate body and attaches to the wood floor surface with two #14 tapping screws.f. Anchor screw. Machined from ¾" cold rolled steel bar. Inserts in floor plate body and holds ⅜" carriage bolt and nut in place below floor plate body.g. Hex nut. ⅜" threads for attachment of ⅜" carriage bolt.h. Carriage bolt. ⅜" x 1½" zinc plated. SAE J429 Grade 5 bolt with 85,000-psi proof load. Provides additional surface area for engaging floor plate in cement.2. The floor plate shall be provided completely assembled and shall have the proper cement andinstallation instructions included with the floor plate package.3. The floor plate must be installed and allowed to set for a minimum of 12 hours before use with equipment.To See all Spalding Volleyball Items, Click Here.