Welcome to Sport Home for your fan sporting equipment.

Collegiate 1 Court Volleyball System without Floor Sleeves and Covers

Collegiate 1 Court Volleyball System without Floor Sleeves and Covers

Item #: 7205
Category: Other Sports T-Z -> Volleyball
Your Price: $3,091.43

 Click here to purchase from Online Sports

Our most popular system. Net height is attained by means of slide rails that are held securely in place by our exclusive locking wedge. Simply turn the knob and slide the rail for full height adjustment from tennis and badminton heights up to 8'. A Four point net attachment lets you set up the system in minutes and quickly achieve accurate net height.Easy to operate no kink linear winch features hardened steel gears and a threaded rod.Net height can be set for badminton and tennis, making it ideal for multi-purpose facilities.Exclusive wedge lock holds rails securely - much more effective than locks used by other sliding rail systems.Lightweight, extraordinarily strong, 4" diameter anodized 6063-t6 extruded aluminum.Over-the-top design allows for easy tensioning of the net. Simply slide the winch rail to remove slack and perform final adjustments with linear winch.Collegiate 1 Court System without Floor Sleeves and Covers includes the following:1 Collegiate Upright1 Collegiate Upright with Winch1 Collegiate net with tensioner1 Pair of Antennas and Net tapes2 Upright Safety pads1 Set (4) Cable coversOnline Sports is an Authorized Online Dealer of Gared Sports products.


You found Collegiate 1 Court Volleyball System without Floor Sleeves and Covers in category Tennis and subcategory Other Sports. If you need to buy more Other Sports than you are on the righ place.
Random sportign fan equipment in this category:
 
Fillable Game Standard Base with Wheel Attachment, 8' Pole and Slides (One Pair)
Fillable Game Standard Base with Wheel Attachment, 8' Pole and Slides (One Pair)

Retail price: $472.86
Your price: $472.86
Includes two fillable game standard bases, two wheel bracket attachments, two 8' poles and four slides.
 
Fill-Your-Own Weight Stabilizer Bag
Fill-Your-Own Weight Stabilizer Bag

Retail price: $40.01
Your price: $40.01
NEW fill-your-own weight bagCan be filled up to 30 lb.Constructed of heavy duty reinforced vinylComplete with reinforced vinyl handles for ease of transportingStrongly recommended to use with Roll-A-Way Basketball Goal, Youth Jump Standards, Econo Game Standards and many other uses
 
Protective Gym/Tent Rope Pads
Protective Gym/Tent Rope Pads

Retail price: $58.18
Your price: $58.18
1/2" thick x 72" long foam rubber with a reinforced vinyl coverFull length hook and loop closurePadding adds protection and gives higher visibilityAvailable in red, blue and green
 
Locking Chrome Floor Plate and Sleeve from Spalding
Locking Chrome Floor Plate and Sleeve from Spalding

Retail price: $199.95
Your price: $199.95
GENERAL DIMENSIONS:The Spalding Chrome Locking Badminton floor plates are designed for use with Spalding's badminton systems that have 2" (51mm) o.d. uprights. The 408-705 package comes with one floor sleeve and one cover plate. The cover plate has a polished Chrome finish and has a hinged cover that closes and locks to flush with the floor when the badminton uprights are not in use. The Chrome plates have a heavy duty cover that resists damage under normal usage.CONSTRUCTION:Floor sleeves: Spalding floor sleeves are constructed of heavy duty steel tubing with a 2-1/16" (52mm) inner diameter. This allows an easy installation of the uprights with minimal movement of the uprights after installation. The floor sleeves are 7⅞" (200mm) deep and have a baked blue powder coat finish.Cover plate package: The cover plate outer ring shall be 7" (178mm) in diameter and ¼" (6mm) thick, with a 4⅜" (111mm) diameter opening for the upright to be placed in the floor sleeves. The cover shall be 4¾" (121mm) in diameter and ¼" (6mm) thick and shall be hinged to the outer ring. The cover shall be seated in the outer ring so that it is flush with the floor surface when closed and can be locked using a flathead screwdriver or coin. The cover plate shall be attached to the floor with four #10-24 tapping screws. The cover plate and outer ring shall have a polished Chrome finish.