Welcome to Sport Home for your fan sporting equipment.

Official's or Lifeguard Seat

Official's or Lifeguard Seat

Item #: MTC190
Category: Other Sports T-Z -> Volleyball
Your Price: $396.92

 Click here to purchase from Online Sports

Ideal seat for judging events or lifeguard duties at pool activitiesThis heavy duty, yet comfortable seat is constructed of 1 3/4" galvanized steel with foam cushioned vinyl covered seatSeat is 5' off the floorSeat is equipped with floor protecting foot padsShipped Freight: Usually takes 2 to 3 weeks for delivery

You found Official's or Lifeguard Seat in category Tennis and subcategory Other Sports. If you need to buy more Other Sports than you are on the righ place.
Random sportign fan equipment in this category:
 
Locking Brass Floor Plate and Sleeve from Spalding
Locking Brass Floor Plate and Sleeve from Spalding

Retail price: $278.46
Your price: $278.46
Brass-plated cover plate includes:Slotted locking mechanismOpens with simple turn of the flathead screwdriver or coinCover plate consists of 7" (18cm) O.D. brass outer ring and hinged brass capHeavy-duty steel sleeve receives 3" to 3 1/2" (7.6 to 8.9cm) upright and is 9 1/4" (23cm) deep1" (2.5cm) clearance required between top of floor and sleeve
 
Protective Pad for Round Econo Game Standards
Protective Pad for Round Econo Game Standards

Retail price: $129.95
Your price: $129.95
For the Round Econo Game StandardsContoured to fit and completely cover the round econo game standardsFoam is 2" thick for extra protectionCovered with a heavy reinforced vinyl laminate for durabilityStocked in red, blue and green
 
Multi-Use Standard 250 lb. Base, 10' Pole and 2 Ring Slides
Multi-Use Standard 250 lb. Base, 10' Pole and 2 Ring Slides

Retail price: $390.76
Your price: $390.76
For Indoor or Outdoor UseWhen searching for a weighted base, you're looking for quality, ease of movement, and practicality of useTC Sports is the oldest manufacturer of these quality bases in the U.S. They are used in most schoolsWhen it comes to quality, "Watch out for look-a-likes."Our base was designed with safety of movement in mindBases have heavy steel bracket supports and heavy duty rubber wheelsThe upright 1 3/4" OD steel pole is attached to the base with a bolt running all the way through the neck of the base and poleIncludes a no-mar rubber rim to protect your gym floorsAll bases are complete with the upright pole and two single ring slidesBase is 24" in Dia. and stem is 10" highBases are available in 3 sizes, (130 lbs., 180 lbs., or 250 lbs. each)Available in 6 colors, (blue, green, red, white, yellow and black)For added protection TC Sports recommends padding be used on all basesIf no color is specified, blue will be shippedBases should always be moved by a responsible adultShipped Freight: Usually takes 2 to 3 weeks for delivery
 
Locking Chrome Floor Plate and Sleeve from Spalding
Locking Chrome Floor Plate and Sleeve from Spalding

Retail price: $199.95
Your price: $199.95
GENERAL DIMENSIONS:The Spalding Chrome Locking Badminton floor plates are designed for use with Spalding's badminton systems that have 2" (51mm) o.d. uprights. The 408-705 package comes with one floor sleeve and one cover plate. The cover plate has a polished Chrome finish and has a hinged cover that closes and locks to flush with the floor when the badminton uprights are not in use. The Chrome plates have a heavy duty cover that resists damage under normal usage.CONSTRUCTION:Floor sleeves: Spalding floor sleeves are constructed of heavy duty steel tubing with a 2-1/16" (52mm) inner diameter. This allows an easy installation of the uprights with minimal movement of the uprights after installation. The floor sleeves are 7⅞" (200mm) deep and have a baked blue powder coat finish.Cover plate package: The cover plate outer ring shall be 7" (178mm) in diameter and ¼" (6mm) thick, with a 4⅜" (111mm) diameter opening for the upright to be placed in the floor sleeves. The cover shall be 4¾" (121mm) in diameter and ¼" (6mm) thick and shall be hinged to the outer ring. The cover shall be seated in the outer ring so that it is flush with the floor surface when closed and can be locked using a flathead screwdriver or coin. The cover plate shall be attached to the floor with four #10-24 tapping screws. The cover plate and outer ring shall have a polished Chrome finish.