Welcome to Sport Home for your fan sporting equipment.

Brass Floor Plate and Ground Sleeve (Pair) from Spalding

Brass Floor Plate and Ground Sleeve (Pair) from Spalding

Item #: 408-725
Category: Other Sports T-Z -> Volleyball
Your Price: $504.62

 Click here to purchase from Online Sports

Cover plate consists of 6 3/4" (17cm) O.D. brass outer ring and hinged brass capHeavy-duty steel sleeve receives a 3" (76mm) standard and is 9 3/32" (23cm) deepCover plate is .375" (10mm) thick and is made of brass.Under the manufacturing expertise of AAI (American Athletic, Inc.), Spalding manufactures top quality volleyball equipment for competitive, recreational and physical education use.

You found Brass Floor Plate and Ground Sleeve (Pair) from Spalding in category Volleyball and subcategory Other Sports. If you need to buy more Other Sports than you are on the righ place.
Random sportign fan equipment in this category:
 
Master Telescopic 2 Court Volleyball System without Floor Sleeves and Covers
Master Telescopic 2 Court Volleyball System without Floor Sleeves and Covers

Retail price: $5989.95
Your price: $5989.95
Similar to the International but instead of using an internal screw rod mechanism to attain net height, the Master has a spring assist that allows the post to glide easily up and down. A four point net attachment lets you set up the system in minutes and allows full height adjustment to 8'. Telescopic design allows fine height adjustment without removal of the net.Easy to operate no kink linear winch features hardened steel gears and a threaded rod.Telescoping internal tube travels on nylon bushings - metal never travels on metal for smooth operation.Exclusive wedge lock holds rails securely - much more effective than locks used by other sliding rail systems.Lightweight, extraordinarily strong, 4" diameter anodized 6063-t6 extruded aluminum.Upper portion of post telescopes inside the bottom section and internal spring assist makes it easy to adjust net height.Master Telescopic 2 Court System without Floor Sleeves and Floor Sleeve Covers includes the following:1 Master Center Upright2 Master Uprights with Winch2 Collegiate nets with tensioner2 Pair of Antennas and Net tapes2 Upright Safety pads1 Center Upright Safety pad2 Sets (4) Cable coversTo order the 4" Volleyball Post Floor Sleeve, click hereTo order the 3 1/2" Volleyball Post Floor Sleeve, click hereTo order the 6 1/4" Brass Cover Plate for Volleyball Post Floor Sleeve, click hereTo order the 8" Brass Cover Plate for Volleyball Post Floor Sleeve, click hereTo order the 6 1/4" Locking Brass Cover Plate for Volleyball Post Floor Sleeve, click hereOnline Sports is an Authorized Online Dealer of Gared Sports products.
 
Volleyball Style E Floor Anchor (2' ⅞ to 5') from Spalding
Volleyball Style E Floor Anchor (2' ⅞ to 5') from Spalding

Retail price: $173.85
Your price: $173.85
Product Features:Installed in floating wood floors resting on sleepers or metal clip fastenersFeatures removable cap and anchoring cement Measure distance from top of floor to bottom of sleeper to determine modelYou may also be interested in one of our many Spalding Volleyball Items.GENERAL DIMENSIONS: Style E floor plates are ½" threaded steelfloor plates for use in installing gymnastics equipment such as uneventension bars, horizontal bar, and ring frame. These floor plates aredesigned for installation into floors that have a floating wood floor overconcrete. The floor plate consists of a floor plate tube assembly, a flatcircular ring that sits flush with the wood floor surface and a removablecap. The area inside the ring allows the top surface to "float" around theanchor without interfering with use of the floor plate. The floor plate willwithstand greater than 6000 lb. (2727 kg) vertical load with no pull out, when installed according to directions. These floor plates are compatible with all AAI cabled gymnastics apparatus as well as with T-base volleyball uprights. Model #422-030 can be installed in floating wood floors where the distance from the top of the floor to the bottom of the sleepers is less than 5" (127 mm).CONSTRUCTION:1. The floor plates consist of the following parts:a. 8" (203 mm) anchor tube. Machined from 1¼" (32 mm) round 1215 steel bar. Internal threads allow insertion of apparatus eyebolts on one end and a carriagebolt on the opposite end. Knurled outer surface engages cement and holds body inplace.b. Hex nut. ½" threads for attachment of ½" carriage bolt.c. Carriage bolt. ½" x 1½" zinc plated. SAE J429 Grade 5 bolt with 85,000-psi proof load. Provides additional surface area for engaging floor plate in cement.d. Floor plate ring that sits flush in floor surface and allows internal area for "float".This is attached to the floor with four ¼" screws.e. Removable floor plate cap. This sits inside the floor plate ring when the plate is notin use to provide a flat floor surface for other activities.2. The floor plate shall be provided completely assembled and shall have the proper cement and installation instructions included with the floor plate package.3. The floor plate must be installed and allowed to set for a minimum of 12 hours before use with equipment.
 
End Standard with Winch for 3" Aluminum Power Volleyball System - (One Standard with Winch)
End Standard with Winch for 3" Aluminum Power Volleyball System - (One Standard with Winch)

Retail price: $629.95
Your price: $629.95
This is for one End Standard with Winch ONLY.Stackhouse Athletics has taken great strides in putting together for you the finest competition aluminum volleyball system on the market. By incorporating the best features form the industryÌs other leading manufacturers, this thick wall aluminum 3" system will meet all of your needs for MenÌs, WomanÌs and Junior volleyball competition. Uprights designed to be compatible with floor plate dimensions of other manufacturers. Uprights powder coated black with net height pre-marked on silver powder coated insert. Inserts are easily raised and lowered with the assistance of an internal spring. Insert held in place using a heavy-duty chromed "T" handle. Fully adjustable lower net collar helps keep bottom rope on net secure. Easy to use worm gear winch uses a 2" wide strap to tighten net to official specifications and insure no kinking of net cable. Competition quality net meets all USVBA standards and uses steel top cable with wood dowels for end net tension.To order the 3" Aluminum Power Volleyball Complete System, click here.Choosing the Stackhouse brand is the ultimate choice for a quality product, priced right, made right, and backed with a "complete customer satisfaction" warranty. Consider the quality, performance and insight that comes from over 60 years of equipping athletes and organizations nationwide.
 
End Standard without Winch
End Standard without Winch

Retail price: $235.71
Your price: $235.71
End standard for use with the Outdoor Steel Volleyball System (shown). There is no actual image of this item. The image shown is representative only. The actual item will be the end standard without winch only.